View WPB-4T3216A-102L_3828854.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

world products inc. electr onic component solutions 19654 eighth street east, sonoma, ca 95476-0517 usa | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com revised 05/06/05 ferrite bead arra ys
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 1 c hip f errite b ead a rrays features 1. available in a wide range of impedance values. 2. providing excellent emi suppression char acteristics for various types of noise. 3. 4 lines achieved with a single chip, ve ry useful in high density circuit design. 4. heat generation and crosstalk between adjacent circuits are at minimum. 5. excellent solderability. 6. rohs compliant with directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs directive) and comply to a maximum concentration valu e of 0.1% by weight in homogeneous materials for lead (pb), me rcury, hexavalent chromium, polybrominated biphenyls (pbb) and polybrominated diphenyl ethers (pbde) and of 0.01% weight in homogeneous materials for cadmium. applications 1. waveform correction in personal computers, el ectric equipment, communication equipment, oa equipment. 2. provides radiated noise countermeasures in interfac es and harness connecting parts. 3. prevents noise intrusion in video, lcd module, etc. 4. parallel signal line. ordering information wpb - 4 m - 3216 ? - 121 t (1) (2) (3) (4) (5) (6) (7) (1) series wpb: for signal line (2) type 4: array (3) material and design h: for general purpose s: for high speed m: for high impedance type t, v: for low speed (4) dimensions* first two digits: length(mm) last two digits: width(mm) (5) thickness a: 0.9mm max b: 0.7mm max c: 1.2mm max ( 6) impedence (at 100mhz) first two digits are impedance values. last digit is the number of zeros following. (7) packaging b: bulk package t: tape & reel ( 178mm [ 7 inch ]) l: tape & reel ( 254mm [10 inch ]) *2012(mm) is equivalent to 0805 (inches). 3216(mm) is equivalent to 1206 (inches). shape & dimensions type l w t c 1 c 2 d m 2.000.15 1.000.15 0.600.1 0.25 0.15 0.3 max 0.500.10 0.2 max wpb-4 ? 2010 b [.079.006] [.063.008] [.031.004] [.020.006] [.012 max] [.020.004] [.008 max] 3.200.2 1.600.2 0.800.1 0.40 0.15 0.300.10 0.800.1 0.200.1 a [.126.008] [.063.008] [.031.004] [.016.006] [.012.004] [.031.004] [.008.004] 3.200.2 1.600.2 0.600.1 0.40 0.15 0.300.10 0.800.10 0.200.1 b [.126.008] [.063.008] [.024.004] [.016.006] [.012.004] [.031.004] [.008.004] 3.20.2 1.600.2 1.100.1 0.40 0.15 0.300.10 0.800.10 0.200.1 wpb-4 ? 3216 c [.126.008] [.063.008] [.043.004] [.016.006] [.012.004] [.031.004] [.008.004] c2 t c1 d l w m
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 2 c hip f errite b ead a rrays specifications izi at 100 mhz( ? ) part no. typ min dcr ( ? ) max rated current (ma) max wpb-4m2010 ? -100 ? 10 7.5 0.10 200 wpb-4m2010 ? -400 ? 40 30 0.15 200 wpb-4m2010 ? -600 ? 60 45 0.30 200 wpb-4m2010 ? -800 ? 80 60 0.30 200 wpb-4m2010 ? -121 ? 120 90 0.40 150 wpb-4m2010 ? -201 ? 200 150 0.60 100 wpb-4m2010 ? -301 ? 300 225 0.80 50 wpb-4t2010 ? -100 ? 10 7.5 0.10 200 wpb-4t2010 ? -400 ? 40 30 0.15 200 wpb-4t2010 ? -600 ? 60 45 0.30 200 wpb-4t2010 ? -800 ? 80 60 0.30 200 wpb-4t2010 ? -121 ? 120 90 0.40 150 wpb-4t2010 ? -201 ? 200 150 0.60 100 wpb-4t2010 ? -301 ? 300 225 0.80 50 wpb-4s2010 ? -100 ? 10 7.5 0.20 200 wpb-4s2010 ? -300 ? 30 23 0.30 200 wpb-4s2010 ? -600 ? 60 45 0.40 150 wpb-4s2010 ? -101 ? 100 75 0.50 150 wpb-4h3216 ? -300 ? 30 22 0.10 200 wpb-4m3216 ? -600 ? 60 45 0.12 200 wpb-4m32160 ? -800 ? 80 60 0.15 150 wpb-4m32160 ? -121 ? 120 90 0.20 100 wpb-4m3216 ? -201 ? 200 150 0.30 100 wpb-4m3216 ? -241 ? 240 180 0.40 100 wpb-4m3216 ? -301 ? 300 225 0.45 100 wpb-4m3216 ? -471 ? 470 353 0.45 100 wpb-4m3216 ? -601 ? 600 450 0.50 100 wpb-4m3216 ? -102 ? 1000 750 0.80 100 wpb-4t3216 ? -600 ? 600 450 0.12 200 wpb-4t3216 ? -121 ? 120 90 0.20 200 wpb-4t3216 ? -201 ? 200 150 0.30 150 wpb-4t3216 ? -241 ? 240 180 0.40 150 wpb-4t3216 ? -301 ? 300 225 0.45 150 wpb-4t3216 ? -601 ? 600 450 0.50 100 wpb-4t3216 ? -102 ? 1000 750 0.80 50 wpb-4s2316 ? -500 ? 50 37 0.20 200 wpb-4s3216 ? -800 ? 80 60 0.25 200 wpb-4s3216 ? -121 ? 120 90 0.25 200 wpb-4s3216 ? -201 ? 200 150 0.30 200 wpb-4s3216 ? -241 ? 240 180 0.35 200 wpb-4s3216 ? -301 ? 300 225 0.40 200 wpb-4v3216 ? -400 ? 40 30 0.15 200 wpb-4v3216 ? -600 ? 60 45 0.20 200 wpb-4v3216 ? -800 ? 80 60 0.20 200 wpb-4v3216 ? -121 ? 120 90 0.30 150 wpb-4v3216 ? -201 ? 200 150 0.40 100 wpb-4v3216 ? -301 ? 300 225 0.50 100 * parts with other electrical characteristics can be provided upon request. * test equipment : hp4291a + hp161692a
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 3 c hip f errite b ead a rrays electrical characteristics 4 array 3216 series wpb-4h3216a-300 wpb-4m3216a-600 wpb-4m3216a-800 1m 10m 100m 1g 0 20 40 60 80 100 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 50 100 150 200 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 50 100 150 200 x r z impedance [ ? ] frequency [hz] wpb-4m3216a-121 wpb-4m3216a-201 wpb-4m3216a-241 1m 10m 100m 1g 0 50 100 150 200 250 300 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 100 200 300 400 500 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 100 200 300 400 500 x r z impedance [ ? ] frequency [hz] wpb-4m3216a-301 wpb-4m3216a-471 wpb-4m3216a-601 1m 10m 100m 1g 0 200 400 600 800 1000 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 200 400 600 800 1000 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 200 400 600 800 1000 x r z impedance [ ? ] frequency [hz]
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 4 c hip f errite b ead a rrays wpb-4m3216a-102 wpb-4t3216a-121 wpb-4t3216a-201 1m 10m 100m 1g 0 500 1000 1500 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 50 100 150 200 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 50 100 150 200 250 300 x r z impedance [ ? ] frequency [hz] wpb-4t3216a-301 wpb-4t3216a-601 wpb-4t3216a-102 1m 10m 100m 1g 0 100 200 300 400 500 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 200 400 600 800 1000 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 500 1000 1500 x r z impedance [ ? ] frequency [hz] wpb-4s3216a-800 wpb-4s3216a-121 wpb-4s3216a-201 1m 10m 100m 1g 0 50 100 150 200 250 300 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 100 200 300 400 500 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 200 400 600 800 1000 x r z impedance [ ? ] frequency [hz] wpb-4s3216a-301 1m 10m 100m 1g 0 300 600 900 1200 1500 x r z impedance [ ? ] frequency [hz]
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 5 c hip f errite b ead a rrays 4 array 2012 series wpb-4m2010b-400 wpb-4m2010b-600 wpb-4m2010b-121 1m 10m 100m 1g 0 50 100 150 200 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 50 100 150 200 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 100 200 300 400 500 x r z impedance [ ? ] frequency [hz] wpb-4m2010b-201 wpb-4m2010b-301 1m 10m 100m 1g 0 100 200 300 400 500 x r z impedance [ ? ] frequency [hz] 1m 10m 100m 1g 0 200 400 600 800 1000 x r z impedance [ ? ] frequency [hz]
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 6 c hip f errite b ead a rrays reliability and test conditions requirements item 3216 2012 test condition operating temp.range -55c~+125c - storage temp. & humidity range 40c max. , 70% rh max. at packing condition resistance to solder heat 1. no damage such as cracks should be caused in chip element. 2. more than 75% of the terminal electrode shall be covered with new solder. 3. impedance change: 30% preheat temperature: 100 to 150c preheat time: 1min solder temperature: 260 10c dipping time: 10 0.5sec. solderability 1. more than 90% of the terminal electrode shall be covered with new solder. 2. inductance change : within 5% 3. impedance change: 30% preheat temperature: 100 to 150c preheat time: 1min solder temperature: 230 10c dipping time: 3 1sec. reflow soldering 1. more than 50 % of the terminal electrode shall be covered with new solder. s t s t * 0.5 preheat temperature: 150c preheat time: 1min solder temperature: 230 10c dipping time: 3 1sec. 1. no mechanical damage. tensile strength (terminal strength) unit : kgf(w) w 1.2(1.0) 0.6 ?t?max. 0.7mm w w (kgf) min. 1. no mechanical damage adhension of terminal electrode (flexure strength) unit : mm (a,b,c), kgf(w) a 0.8 0.5 - b 0.8 0.5 - c 3.0 2.0 - d 0.4 0.25 - w 5.0 2.0 - land pattern r 0.5 w a d c b 1. the body shall not be damaged by forces applied (see illustration.) body strength (bending strength) unit : mm (d), kgf(w) d 2.0 1.3 - w 3.0 2.0 - r 0.5 w d t 1.0mm
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 7 c hip f errite b ead a rrays reliability and test conditions requirements item 3216 2012 test condition drop 1. no mechanical damage 2. impedance change: within 30% drop 10 times on a concrete floor from a height of 91cm vibration 1. no mechanical damage 2. impedance change: within 30% frequency: 10~55~10hz amplitude: 1.52mm direction and time: x,y,z directions for 2 hours thermal shock (temperature cycle) 1. no mechanical damage 2. impedance change: within 30% step1. -40 3c 30 3min. step2. 85 3c 30 3min. number of cycle: 100 times heat load resistance 1. no mechanical damage 2. impedance change: within 30% temperature: 85 2c applied current: rated current time: 1,000 hours measured at ambient temperature after placing for 24 hours low temp. resistance 1. no mechanical damage 2. impedance change: within 30% temperature: -40 5c time: 1,000 hours measured at ambient temperature after placing for 24 hours humidity resistance 1. no mechanical damage 2. impedance change: within 30% temperature: 40 2c humidity: 90~95% rh applied current: rated current time: 500 hours measured at ambient temperature after placing for 24 hours humidity load resistance 1. no mechanical damage 2. impedance change: within 30% temperature: 40 2c humidity: 90~95% rh applied current: rated current time: 500 hours measured at ambient temperature after placing for 24 hours cross 1. cross talk: max ?30db 2. cross talk= 20 log (vx/vin) drop voltage: 5v pulse width: 100ns pulse duration: 16.6 ms test diagram: fig. 1 pulse generator digital storage osc ba 1 2 3 4 fig. 1 cross talk test diagram drop voltage (a~b): vin (5vrms) output voltage(1,2,3,~4): vx
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 8 c hip f errite b ead a rrays land pattern design a d bc labeling label 1) part name. 2) lot no. 3) quantity. standard quantity for packing tape & reel bulk packing type(eia) reel inner box carton box vinyl or cassette 3,000 30,000 120,000 3216 7,000 70,000 280,000 as requested *packing method can be changed upon request. tape dimensions embossing 8mm unit: mm type a 0.1 b 0.1 p 0.1 k 0 0.1 t (max.) 1.90 3.60 4.0 1.00 0.3 3216 1.90 3.60 4.0 1.35 0.3 t 8. 0 0.3 p a b 2.0 0.05 4.0 0.1 chip cavity sprocket hole 1.5 + 0.1, - 0 1.75 0.1 3.5 0.05 unit : mm ko unit: mm size a b c d 3216 0.8 0.8 3.0 0.5 2012 0.5 0.5 1.5 0.4
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 9 c hip f errite b ead a rrays leader and blank portion the pitch holes shift within 0 .3mm for cumulative 10 pitches. reel dimensions type w (mm) 3216 array 9.0 0.3 top cover tape strength the force for tearing off top cover tape is 20 to 70 grams in the arrow direction. 10 to 20 pitches 20 to 40 pitches 210 to 250mm leader drawing direction chips blank blank less than 1.5 r1.0 2.0 0.8 178 2.0 254 2.0 21.0 0.8 unit : mm 13.0 0.5 more than 50 w top cover tape 165 to 180 embossing tape
world products inc. 19654 eighth street east, sonoma, ca 95476, phone (707) 996-5201, fax (707) 996-3380 www.worldproducts.com 050605 rev. 11.0 10 c hip f errite b ead a rrays soldering profile reflow soldering(peak 230c) reflow soldering (peak 250c) flo w soldering manual soldering precaution for storage electrical characteristics of product will not change when stored under typical environm ental conditions. however, it is possi ble that the solderability of terminal electrodes and t he characteristics of the tape packaging c an change during storage. for this reason, the following storage guidelines should be followed. 1. storage environment: the tape packaging material is desi gned to withstand long-term storage but they will degrade more rapi dly in the presence of high temperature or high humidity. therefore, product shall be stored in an ambient temperature of less than 4 0c with a relative humidity of less than 70%. the products should be used within 6 months of rece ipt. to achieve best solderabil ity, product should be used as soon as possible after unpacking. leftover product must be stored in dry condition with desiccant. 2. corrosive gases: since sulfur and chlorine may degrade the sol derability of the terminal electrodes, it is important to sto re the product in an environment free of such gases. 3. temperature fluctuations: dew condensation may occur when the product is taken out of storage due to variation of temperatu re. it is important to maintain a temperature-controlled environment. disclaimer: the names of the products and the specifications in this catalog are subject to change without notice for the sake of improvement. world products inc. also reserves the right to discontinue any of these products. the products in this catalog are intended for use in ordinary electronic products. if any of these products are to be used in special applications requiring extremely high reliability, where product defects might pose a safety risk, please consult world products inc. though world p roducts inc. has taken all possible precautions to ensure the quality and reliability of its products, improper use of products may result in bodily injury, fire, or similar accident. if y ou have any questions regarding the use of the products in question, please consult world products inc. please be advised that world products inc. accepts no responsibility for any infraction by users o f world products inc. products on third party patents or industrial copyrights. 300 200c 230c 150c 0 50 100 150 200 250 60 sec. min. 20 sec. max. soldering 10 sec. max. cooling 60 sec. min. 250c 220c 190c 150c 0 50 100 150 200 250 300 350 100 sec. min. 60 sec. max. soldering 10 sec. max. 175c 250c 150c 0 50 100 150 200 60 sec. min. dipping 10 sec. max. cooling 60 sec. min. preheating 100 sec. max. ? t 200c/ .5 sec 300c tcc soldering 2 sec max. solder iron 30w max. diameter of solder iron 1.2mm max. ?

▲Up To Search▲

Price & Availability of WPB-4T3216A-102L

	To Download WPB-4T3216A-102L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .